Repair of Opel Corsa C, from 2000 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
		2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
		2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
		2.3. Cooling system
		2.4. Lubrication system
		2.5. System of injection
		2.6. Petrol engines – the general procedures of check
		2.7. Mechanical part of the engine
		2.8. Test and repair operations of components of a mechanical part of the engine
		2.9. Cooling system
		2.10. System of injection of fuel of petrol engines
			2.10.1. Removal and installation of fuel nozzles
			2.10.2. Replacement of a fuel-supply line of high pressure (The pump of high pressure – the pressure chamber)
			2.10.3. Module of the fuel pump
			2.10.4. Replacement of the module of a dosage
			2.10.5. Replacement of the regulator of pressure of fuel
			2.10.6. Replacement of damping fuel return case
			2.10.7. Replacement of the fuel level sensor
			2.10.8. Fuel tank
			2.10.9. Replacement of a tube of a jellied mouth of the fuel tank (petrol engines)
			2.10.10. System of catching of vapors of fuel
			2.10.11. Replacement of a forward ventilating tube
			2.10.12. Removal and installation of container with absorbent carbon
			2.10.13. Removal and installation of the sensor of a mass consumption of air
			2.10.14. System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)
			2.10.15. System of release (Z18 XE)
		2.11. Lubrication system
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

2-10-13-snyatie-i-ustanovka-datchika-massovogo-raskhoda-vozdukha.html

2.10.13. Removal and installation of the sensor of a mass consumption of air

Removal

Open a cowl

Remove the sensor of a mass consumption of air.

For this purpose disconnect the socket of a plait of wires and 2 hoses of an air inlet.

Remove 2 collars.

Installation

Install the sensor of a mass consumption of air.

Connect an air inlet hose.

Tighten 2 collars the moment of 3.5 N · m.

Connect the socket of a plait of wires.

Close a cowl.

"on the page back
2.10.12. Removal and installation of container with absorbent carbon

on the following page"
2.10.14. System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)