Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.3. Cooling system
2.4. Lubrication system
2.5. System of injection
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Test and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.10.1. Removal and installation of fuel nozzles
2.10.2. Replacement of a fuel-supply line of high pressure (The pump of high pressure – the pressure chamber)
2.10.3. Module of the fuel pump
2.10.4. Replacement of the module of a dosage
2.10.5. Replacement of the regulator of pressure of fuel
2.10.6. Replacement of damping fuel return case
2.10.7. Replacement of the fuel level sensor
2.10.8. Fuel tank
2.10.9. Replacement of a tube of a jellied mouth of the fuel tank (petrol engines)
2.10.10. System of catching of vapors of fuel
2.10.11. Replacement of a forward ventilating tube
2.10.12. Removal and installation of container with absorbent carbon
2.10.13. Removal and installation of the sensor of a mass consumption of air
2.10.14. System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)
2.10.15. System of release (Z18 XE)
2.11. Lubrication system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

2-10-11-zamena-perednejj-ventilyacionnojj-trubki.html

2.10.11. Replacement of a forward ventilating tube

Removal
Remove a forward axis.
Disconnect 2 lower arms of a fuel-supply line, having turned off 2 bolts of fastening.
Disconnect a forward ventilating tube from the central ventilating tube.
Disconnect the quick disconnect coupling.
Disconnect a forward ventilating tube from a ventilating tube of container with absorbent carbon.
Disconnect the quick disconnect coupling.
Pick up the ventilating phone, having exempted it from an arm in 6 places.

Installation
Establish a ventilating tube.
Fix in an arm in 6 places.
Attach a forward ventilating tube to the central ventilating tube and a ventilating tube of container with absorbent carbon.
Connect 2 quick disconnect couplings.
Attach 2 lower arms of a fuel-supply line and fix them by 2 bolts.
Establish a forward axis.

"on the page back
2.10.10. System of catching of vapors of fuel
on the following page"
2.10.12. Removal and installation of container with absorbent carbon