Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.3.1. General information
3.3.2. Hydrotransformer
3.3.3. Main transfer
3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
3.3.5. Designation of the automatic transmission (AF 13-II)
3.3.6. Check of a condition of gearbox oil (AF13-II)
3.3.7. Check of pressure of oil (AF13-II)
3.3.8. Check of the position switch of the lever of gear shifting (AF13-II)
3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
3.3.10. Adjustment of the position switch of the lever of gear shifting (AF13-II)
3.3.11. Adjustment of hummock system of the drive of gear shifting (AF13-II)
3.3.12. Replacement of hummock system of the drive of gear shifting (AF13-II)
3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting
3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
3.3.15. Replacement of the control unit of the electronic switch of the check point
3.3.16. Replacement of the glow lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

3-3-14-zamena-zhguta-provodov-v-uzle-rychaga-pereklyucheniya-peredach-af13-ii.html

3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)

Dismantle the average console.
Dismantle gear shifting lever knot.
Unfasten an insert of the automatic block of the console (arrow) and to pull up.
Take out glow lamps with the boss from an insert of the automatic block of the console.
Pull out lamps from the boss.
Unfasten a plait of wires of the drive of gear shifting from the holder of a plait of wires 3.
Disconnect a cable collar 2.
Disconnect a weight wire from the grounding distributive block (shooter).
Wring out from a plait of wires a wire with spring contact of the push-button switch of the economic/sports modes (contact 2 in the X51 socket) and the push-button switch of the winter program (contact 3, 4 and 5 in the X51 socket) by means of MKM-923-22 adaptation.

NOTE
You keep order of distribution of wires.

Disconnect the socket of wires 4 magnetic switches of lock adaptation of the lever of gear shifting 5.
1 unfasten the socket of a plait of wires from knot of the lever of gear shifting and to remove a plait of wires of the drive of gear shifting.
Attach the socket of wires of 1 magnetic switch of the lever of gear shifting 2.
Press a wire with spring contact of the push-button switch of the economic/sports modes (contact 2 in the X51 socket) and the push-button switch of the winter program (contact 3, 4 and 5 X51 sockets) into the socket of a plait of wires.

NOTE
You keep order of distribution of wires.

Fix the socket of a plait of wires in gear shifting lever knot.
Attach a wire of mass of the grounding distributive block.
Fix glow lamps with the boss in an insert of the automatic block of the console.
Insert lamps into a cartridge.
Record an insert of the automatic block of the console.
Record a plait of wires of the drive of gear shifting in the holder of a plait of wires 5.
Fix a plait of wires of the drive of gear shifting by a cable collar 4.
Build in gear shifting lever knot.
Install the average console.
Check functions of ensuring reliability of the lever of gear shifting.

"on the page back
3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting
on the following page"
3.3.15. Replacement of the control unit of the electronic switch of the check point