Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
8.1. Features of a design
8.2. Hinged elements
8.2.1. Removal and installation of a front bumper
8.2.2. Removal and installation of the holder of a forward beam (blow limiter)
8.2.3. Replacement covered
8.2.4. Removal and installation of a protective covering in a wing
8.2.5. Removal and installation of a rear bumper
8.2.6. Removal and installation of a molding of an entrance aperture
8.2.7. Removal and installation of a forward protective level
8.2.8. Removal and installation of a water repeller
8.2.9. Replacement of additional consolidation of a frame of a roof
8.2.10. Removal and installation of a cowl
8.2.11. Removal and installation of the lock of a forward door
8.2.12. Removal and installation of the external handle of a forward door
8.2.13. Replacement of a guide of glass of a lifting window of a forward door
8.2.14. Removal and installation of an internal covering of a forward door
8.2.15. Remove and establish a level of a crack of a window regulator of a forward / back door inside
8.2.16. Removal and installation of a bracket of the lock of a forward door
8.2.17. Removal and installation of consolidation of a forward door
8.2.18. Removal and installation of a back door
8.2.19. Removal and installation of an internal covering of a back door
8.2.20. Removal and installation of consolidation of a back door
8.2.21. Removal and installation of a back folding door
8.2.22. Removal and installation of the lock of a back folding door
8.2.23. Removal and installation of the external handle of a back folding door
8.2.24. Removal and installation of a pneumatic spring of a back folding door
8.2.25. Removal and installation of consolidation of a back folding door
8.2.26. Removal and installation of an internal covering of a back folding door
8.2.27. Removal and installation of consolidation flew down in a back folding door
8.2.28. Replacement of an element of management of the external rear-view mirror regulated from within
8.3. Body glazing
9. Schemes of electric equipment
 





0653563c

8-2-5-snyatie-i-ustanovka-zadnego-bampera.html

8.2.5. Removal and installation of a rear bumper

Removal
Open a back folding door.
Weaken the top part of a rear bumper.
Weaken the lower part of a rear bumper.
Weaken an overlay of an external contour of a wheel arch plum and the right side.
Remove a rear bumper.
To disconnect a plait of wires.

Installation
Establish a rear bumper.
Attach a plait of wires.
Fix the top part of a rear bumper.
Fix the lower part of a rear bumper.
Fix an overlay of an external contour of a wheel arch from the left and right side.
Close a back folding door.

"on the page back
8.2.4. Removal and installation of a protective covering in a wing
on the following page"
8.2.6. Removal and installation of a molding of an entrance aperture