Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.2.1. Regulation of phases of gas distribution by impact on the Z10XEP, Z12XE, Z14XEP camshaft (since the end of 2004 till 2005 release)
2.2.2. Adjustment of phases of gas distribution (Z10XE, Z10XEP, without conditioner)
2.2.3. Replacement of a poliklinovy belt (Z10XE, Z10XEP, with the conditioner)
2.2.4. Head of the block of cylinders
2.2.5. Removal and installation of the GRM case (Z10XE, Z10XEP)
2.2.6. Repair of the engine (Z10XE, Z10XEP, without conditioner)
2.2.7. Block of cylinders, krivoshipno-conrod mechanism and piston group
2.3. Cooling system
2.4. Lubrication system
2.5. System of injection
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Test and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.11. Lubrication system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

2-2-4-golovka-bloka-cilindrov.html

2.2.4. Head of the block of cylinders

Help and repair values see the table are lower.

NOTE
Turning of a head of cylinders is not allowed.

Help and repair values

Help and repair values (head of the block of cylinders): 1 – cylinder head height; 2 – assembly height of a guide of the valve; 3 – assembly height of the valve; 4 – valve saddle width in a head of cylinders; 5 – a valve saddle corner in a head of cylinders; 6 – diameter of a rod of the valve; 7 – a valve saddle corner on the valve; 8 – valve length; 9 – diameter of a plate of the valve

"on the page back
2.2.3. Replacement of a poliklinovy belt (Z10XE, Z10XEP, with the conditioner)
on the following page"
2.2.5. Removal and installation of the GRM case (Z10XE, Z10XEP)