Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. System of power supply
7.2. System of lighting
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the glow lamp of driving beam
7.2.6. Replacement of the glow lamp of passing beam
7.2.7. Replacement of the glow lamp of xenon headlights
7.2.8. amine of the glow lamp of the index of turn (xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp of driving beam / lamp of parking fires (xenon headlight)
7.2.11. Replacement of the glow lamp / lighting lamp of a luggage carrier or luggage compartment
7.2.12. Removal and installation of illumination of registration plate / glow lamp
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / glow lamps
7.2.15. Removal and installation of the back lamp of the salon / glow lamp
7.2.16. Removal and installation of the lighter / glow lamp
7.3. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

7-2-2-regulirovka-protivotumannykh-far.html

7.2.2. Adjustment of fog lights

Adjustment
To check/correct air pressure in tires. Regulation is carried out with own mass of the car with one person or freight of 75 kg on sitting of the driver. See also working process "Check and adjustment of headlights".
It is possible to adjust fog lights by means of an adjusting bolt of fastening 1 on the upper bound light darkness with use of the device for adjustment. The border passes light darkness at the same time horizontally along the adjusting line.
The inclination of fog lights makes 20 cm by 10 m (corresponds to an inclination of a beam of light of 2%).
Removal and installation of headlights
Removal
Dismantle a forward covering.
Dismantle headlights.
Unblock and disconnect the socket of a plait of wires, unscrew the screw (shooters).

Installation
Establish headlights.
Connect the socket of a plait of wires, tighten the screw.
Establish a forward covering.
Adjust headlights.

"on the page back
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
on the following page"
7.2.3. Removal and installation of headlights